Need help? Call us: 01539 621884
9am to 5:30pm Monday to Friday
Subtotal: £0.00 (0)

Volkswagen VW Caddy Cargo L1 (SWB) (2021 onwards)

with fixing points and twin rear doors

Rhino KammBar Fleet steel roof bars (3 bars) KD3FL


Rhino KammBar Fleet steel roof bars (3 bars) KD3FL to fit your Volkswagen VW Caddy Cargo L1 (SWB) (2021 onwards)

Rhino's KammBar Fleet roof bars are based around the 'Kamm' teardrop-shaped roof bar profile, inspired by the pioneering work of the German aerodynamicist Professor Wunibald Kamm - the shape reduces drag by up to 60% compared to square-edged profiles, reducing both wind noise and fuel consumption.

KammBar Fleet roof bars provide a bespoke fit for each vehicle, using shaped pads and spacers that leave the bars sitting horizontal when the van is on a horizontal surface.

The Kamm cross-bars are made from E320+CR2 S2 high-tensile steel, rust-proofed with an inorganic zinc seal; this has passed over 250 hours of salt spray testing. The roof bar legs, covered with strong composite plastic covers for good looks, are of HR4 mild steel with a textured black powder coating, with (as appropriate) stainless or galvanised steel bolts, washers and nylock nuts.

Locks are available as an extra, shown in the list below.

The KammBar Fleet bar system has been crash tested by the German TÜV to 20 g, which means that the bars, loaded to their permitted maximum, have survived a horizontal stress which is equivalent to 20 times that weight. We understand that this replicates the forces created by a deceleration from approximately 30mph to 0mph in half a second.

Roof bar crash testing is about proving that the bars stay firmly in place on the vehicle, particularly important in urban situations. It's up to the users to fix the load intelligently, not to carry more than the maximum permitted roof weight for this vehicle, and to modify driving techniques according to the weight on the roof.

Other points to note:

  • The Kamm cross tubes are 60mm wide by 37mm deep; they are suitable for all roof boxes that we supply that have 'claw-style' roof bar fittings - Atera, Hapro, Thule. KAMEI Delphin and Husky fittings still need to be checked, and also e.g. Yakima water-sports carrier fittings and Thule roof-mounted bike carrier fittings
  • KammBar Fleet are supplied partially assembled, with the legs ready to slide onto the cross bars, allowing for faster fitting
  • KammBar Fleet are supplied in one box, to get around the potential problem of split courier deliveries
  • As well as the locks, a range of other accessories is also available, notably load stops and ladder clamps (both sold in pairs) and rear rollers; the rear roller that's appropriate for this van will be shown in the list below as a Core component.
  • Total weight per single bar: 124cm = 2.6kg; 142cm = 2.8kg; 160cm = 3.1kg; 170cm = 3.2kg

In summary, these are excellent roof bars, good value for money. They are the same as the KammBar Pro except for the cross bar profiles; KammBar Pro profiles are aluminium; KammBar Fleet profiles are steel.



Really good quality, reinforced black aluminium bars on low profile feet; smart looking, aerodynamic, and great value.

This is a modular system, with feet and bars supplied as two products, in two boxes; both items are ticked in the list below. Depending on van width you may only need a new set of feet when you change your van.

The locks and, as appropriate, any roller, roller supports and rear ladder are also shown below. Other accessories such as load stops, folding load stops (using the rear slot), ladder clamps and pipe tubes, are also available.

There are three slots in each bar, with rubber filler strip provided for the top and bottom slots:

  • the feet fit into the bottom slot (which is not full length)
  • the top slot is available for any standard 20mm T-track slot accessories, including load stops, pipe carrier fittings, eye-bolts, and of course any domestic load carrying needs such as bike carriers, kayak carriers, ski carriers, roof boxes
  • the rear slot allows a range of innovative accessories to be fitted that won’t interfere with the load, including folding load stops and rear rollers

The aluminium bars are 52mm wide x 35mm deep, and are made from anodised aluminium alloy 6063–T6; the steel feet and fitting parts are Oxsilan pretreated – a modern and environmentally low-impact rust-proofing solution – before being polymer coated; the whole roof bar system exceeds the test of 1,000 hours in a saline fog chamber.

In addition, CRUZ commercial roof bars are tested to roof rack standards DIN 75302:2019 and ISO/PAS 11154:2006. They are TÜV GS safety tested, and crash tested to roof rack standards.

The bars have a maximum loading of 100kg (50kg per bar), but be guided by the vehicle loading limit if this is lower.

There is a 3 year warranty - product registration is required to extend the warranty from 2 years to 3 years.

Cruzber is Spain’s largest roof bar and roof rack manufacturer, founded in 1963, based in the Province of Córdoba in Andalusia. They sell most of their products under the CRUZ brand label, operating from over 145,000 square feet of modern premises and using state of the art manufacturing machinery. Cruzber is very highly regarded in the European market in particular, and now operates in over 30 countries worldwide.

Delivery charges and arrangements:

At the moment there are no delivery charges for Rhino roof bars and roof racks, and associated accessories, ordered from van-racks.co.uk, except for any delivery including a sea crossing, and deliveries to Skye. If your delivery falls into this category we will contact you with a quote on receipt of your order.

All Rhino Products orders need to be placed by 3:30pm for Express Delivery; the cut off time for other brands is 4pm. At the moment neither we nor Rhino Products are able to offer a reliable Next Working Day delivery service, because of pressure on the UK courier network due to the coronavirus crisis and the increase in online shopping. We therefore offer an Express Delivery service, where many orders will arrive on the next working day, but many will arrive a day later, or be split across the two days. There is unfortunately nothing that we can do to change this.

There are no deliveries on Saturdays, Sundays or Bank Holidays, except for postable items where Royal Mail has a Saturday delivery. Express Delivery orders placed on a Friday will therefore be delivered from the Monday, and Express Delivery orders placed on a Saturday will be delivered from the Tuesday.

We are very flexible with our deliveries and will aim to deliver at an address which suits you. Rhino roof bars and roof rack orders need to be signed for; note that there's a "Special Delivery Instructions" box in the checkout area.

No retailer or courier company can ever "guarantee" a Next Working Day delivery. All courier companies occasionally have the same transport problems as can happen to everyone else, including snow blocked roads, closed roads, traffic jams, mechanical breakdown, an inability to find the delivery address, or to gain access to it if, for example, it's in a block of flats. We work with some of the best couriers in the business, and overall they provide an outstanding service.

Payment options:

We take the following cards, and also PayPal. Please note that the entry on your card statement will be from "The Roof Box Company".

accepted cards

If you would prefer not to pay online, or to pay by cheque, please phone us to place your order.

Secure payments


Multi Domain SSL
Our website is secured by
Comodo SSL Certificate Authority.


Item: Description: Our price (each): RRP:
 
Core components:
Rhino bar system: £137.46 £208.00
 
Ladder handling:
Rhino SafeStow4: £816.63 £1170.97
Rhino SafeStow4: £979.13 £1405.15
Rhino SafeStow4: £841.63 £1207.94
Rhino SafeStow4: £1033.29 £1479.12
 
Core components:
CRUZ commercial feet: £30.00 £34.58
CRUZ commercial aluminium bars: £68.33 £79.17
 
Locks:
CRUZ locks: £8.33
Rhino locks: £22.50 £36.40
 
Rear ladders:
CRUZ rear ladder fitting kit: £29.79 £34.17
CRUZ rear ladder: £112.50 £129.17
 
Ladder handling:
Ladder clamps: £54.17 £81.17
Ladder handling: £229.13 £330.16
 
Rear roller:
CRUZ complete roller system: £56.25 £65.00
CRUZ roller supports: £31.46 £36.25
CRUZ rear roller £11.46 £13.33
 
Pipe tubes and fittings:
Pipe tube: £187.46 £274.70
Pipe tube: £229.13 £331.04
 
Load stops:
Load stops: £12.46 £18.20
Load stops: £20.79 £31.20
 
Beacon bracket:
Beacon bracket: £38.33 £58.10

All our prices exclude VAT Total: £235.79