The first 2 components listed below are all you need for a 2 bar system.
Rhino feet are pressed from phospate pre-treated and black powder-coated 2.5mm mild steel Zintec. The MEGA bars are made of 40mm x 40mm x 2mm box section, zinc plated and colour passivated to provide good corrosion resistance.
All fixings are of stainless steel, with lock nuts supplied as standard.
Other useful vehicle-specific accessories are also shown below, e.g. rear roller components - you need to order both the roller and the support brackets. There's also a choice of load stops.
Click on "Buy Checked Items" to order what you need from this page and then choose "Continue Shopping" to find our range of vehicle-specific bulk heads, security grilles, internal racking and ply lining systems. For general items, e.g. pipe carriers, tool safes, straps and lashings, ladder clamps, check the links above.
Any questions, don't hesitate to phone us on 08700 766326 (Monday to Saturday 9.00am to 6.00pm).
These are temporary pictures which give an overview of a standard Rhino system - it should be obvious if they do not represent your van.
Order a set of Rhino bars from us and we'll give you, for a nominal 10p only (including VAT), a pair of superb quality Swedish made FASTY 25mm straps to help hold your load in place. Please note that only one pair of free straps will be included per pair of roof bars ordered.
As a further promotion, if you order any 4 items from this list
(except the free straps) we'll give you 5% off your whole order, and if you choose everything on the list (except the Safestow ladder handling system, where shown) we'll give you 7.5% off your order. All these items must be ordered for one delivery, and must be Rhino branded products. We will of course give you 7.5% off the Safestow ladder handling system if you order everything on this list and include the Safestow.
